Foundry Cast: Starknet CLI Interaction

Starknet Foundry is a tool designed for testing and developing Starknet contracts. It is an adaptation of the Ethereum Foundry for Starknet, aiming to expedite the development process.

The project consists of two primary components:

  • Forge: A testing tool specifically for Cairo contracts. This tool acts as a test runner and boasts features designed to enhance your testing process. Tests are written directly in Cairo, eliminating the need for other programming languages. Additionally, the Forge implementation uses Rust, mirroring Ethereum Foundry's choice of language.
  • Cast: This serves as a DevOps tool for Starknet, initially supporting a series of commands to interface with Starknet. In the future, Cast aims to offer deployment scripts for contracts and other DevOps functions.

Cast

Cast provides the Command Line Interface (CLI) for starknet, while Forge addresses testing. Written in Rust, Cast utilizes starknet Rust and integrates with Scarb. This integration allows for argument specification in Scarb.toml, streamlining the process.

sncast simplifies interaction with smart contracts, reducing the number of necessary commands compared to using starkli alone.

In this section, we'll delve into sncast.

Requirements

# scarb --version
scarb 2.4.3
cairo: 2.4.3
sierra: 1.4.0

# snforge --version
snforge 0.14.0

# sncast --version
sncast 0.14.0
The Rust Devnet

Step 1: Sample Smart Contract

The following code sample is sourced from starknet foundry(You can find the source of the example here). If yo desire to get the files you can do it from Foundry Example Code

#![allow(unused)]
fn main() {
#[starknet::interface]
trait IHelloStarknet<TContractState> {
    fn increase_balance(ref self: TContractState, amount: felt252);
    fn get_balance(self: @TContractState) -> felt252;
}

#[starknet::contract]
mod HelloStarknet {
    #[storage]
    struct Storage {
        balance: felt252,
    }

    #[abi(embed_v0)]
    impl HelloStarknetImpl of super::IHelloStarknet<ContractState> {
        // Increases the balance by the given amount.
        fn increase_balance(ref self: ContractState, amount: felt252) {
            self.balance.write(self.balance.read() + amount);
        }

        // Gets the balance.
        fn get_balance(self: @ContractState) -> felt252 {
            self.balance.read()
        }
    }
}
}

Before interacting with this sample smart contract, it's crucial to test its functionality using snforge to ensure its integrity.

Here are the associated tests:

Take a keen look onto the imports ie

#![allow(unused)]
fn main() {
use casttest::{IHelloStarknetDispatcherTrait, IHelloStarknetDispatcher}
}

casttest from the above line is the name of the project as given in the scarb.toml file

#![allow(unused)]
fn main() {
#[cfg(test)]
mod tests {
    use casttest::{IHelloStarknetDispatcherTrait, IHelloStarknetDispatcher};
    use snforge_std::{declare, ContractClassTrait};

    #[test]
    fn call_and_invoke() {
        // Declare and deploy a contract
        let contract = declare('HelloStarknet');
        let contract_address = contract.deploy(@ArrayTrait::new()).unwrap();

        // Create a Dispatcher object for interaction with the deployed contract
        let dispatcher = IHelloStarknetDispatcher { contract_address };

        // Query a contract view function
        let balance = dispatcher.get_balance();
        assert(balance == 0, 'balance == 0');

        // Invoke a contract function to mutate state
        dispatcher.increase_balance(100);

        // Verify the transaction's effect
        let balance = dispatcher.get_balance();
        assert(balance == 100, 'balance == 100');
    }
}
}

If needed, copy the provided code snippets into the lib.cairo file of your new scarb project.

To execute tests, follow the steps below:

  1. Ensure snforge is listed as a dependency in your Scarb.toml file, positioned beneath the starknet dependency. Your dependencies section should appear as (make sure to use the latest version of snforge and starknet):
starknet = "2.4.1"
snforge_std = { git = "https://github.com/foundry-rs/starknet-foundry.git", tag = "v0.14.0" }
  1. Run the command:
snforge test

Note: Use snforge for testing instead of the scarb test command. The tests are set up to utilize functions from snforge_std. Running scarb test would cause errors.

Step 2: Setting Up Starknet Devnet

For this guide, the focus is on using Rust starknet devnet. If you've been using katana or pythonic devnet, please be cautious as there might be inconsistencies. If you haven't configured devnet, consider following the guide from Starknet devnet for a quick setup.

To launch starknet devnet, use the command:

cargo run

Upon successful startup, you should receive a response similar to:

Finished dev [unoptimized + debuginfo] target(s) in 0.21s
     Running `target/debug/starknet-devnet`
Predeployed FeeToken
Address: 0x49D36570D4E46F48E99674BD3FCC84644DDD6B96F7C741B1562B82F9E004DC7
Class Hash: 0x6A22BF63C7BC07EFFA39A25DFBD21523D211DB0100A0AFD054D172B81840EAF

Predeployed UDC
Address: 0x41A78E741E5AF2FEC34B695679BC6891742439F7AFB8484ECD7766661AD02BF
Class Hash: 0x7B3E05F48F0C69E4A65CE5E076A66271A527AFF2C34CE1083EC6E1526997A69

| Account address |  0x243a10223fa0a8276cb9bb48cbb2da26dd945d0d09162610d32365b1f8580e1
| Private key     |  0x41f7d13cf9a928319d39c06b328f76af
| Public key      |  0x21952db4ec4ca2f0ce5ea3bfe545ad853043b80c06ef44335908e883e5a8988

...
...
...
2023-11-23T17:06:48.221449Z  INFO starknet_devnet: Starknet Devnet listening on 127.0.0.1:5050

(Note: The abbreviated ... is just a placeholder for the detailed response. In your actual output, you'll see the full details.)

Now, you have written a smart contract, tested it, and successfully initiated starknet devnet.

Dive into sncast

Let's unpack sncast.

As a multifunctional tool, the quickest way to discover its capabilities is via the command:

sncast --help

In the output, you'll notice distinct categories: commands and options. Each option offers both a concise (short) and a descriptive (long) variant.

Tip: While both option variants are useful, we'll prioritize the long form in this guide. This choice aids clarity, especially when constructing intricate commands.

Delving deeper, to understand specific commands such as account, you can run:

sncast account help

Each account subcommand like add, create, and deploy can be further explored. For instance:

sncast account add --help

The layered structure of sncast provides a wealth of information right at your fingertips. It's like having dynamic documentation. Make it a habit to explore, and you'll always stay informed.

Step 3: Using sncast for Account Management

Let's delve into how to use sncast for interacting with the contract.

By default, starknet devnet offers several predeployed accounts. These are accounts already registered with the node, loaded with test tokens (for gas fees and various transactions). Developers can use them directly with any contract on the local node (i.e., starknet devnet).

How to Utilize Predeployed Accounts

To employ a predeployed account with the smart contract, execute the account add command as shown below:

sncast [SNCAST_MAIN_OPTIONS] account add [SUBCOMMAND_OPTIONS] --name <NAME> --address <ADDRESS> --private-key <PRIVATE_KEY>

Although several options can accompany the add command (e.g., --name, --address, --class-hash, --deployed, --private-key, --public-key, --salt, --add-profile), we'll focus on a select few for this illustration.

Choose an account from the starknet-devnet, for demonstration, we'll select account #0, and execute:

sncast --url http://localhost:5050/rpc account add  --name account1 --address 0x5f...60ba --private-key 0xc...0acc --add-profile

Points to remember:

  1. -name - Mandatory field.
  2. -address - Necessary account address.
  3. -private-key - Private key of the account.
  4. -add-profile - Though optional, it's pivotal. By enabling sncast to include the account in your Scarb.toml file, you can manage multiple accounts, facilitating transactions among them when working with your smart contract using sncast.

Now that we have familiarized ourselves with using a predeployed account, let's proceed to add a new account.

Creating and Deploying a New Account to Starknet Devnet

Creating a new account involves a few more steps than using an existing one, but it's straightforward when broken down. Here are the steps:

  1. Account Creation

To create a new account, use (you can use sncast account create --help to see the available options):

sncast --url http://localhost:5050/rpc account create --name new_account --class-hash  0x19...8dd6 --add-profile

Wondering where the --class-hash comes from? It's visible in the output from the starknet-devnet command under the Predeclared Starknet CLI account section. For example:

Predeclared Starknet CLI account:
Class hash: 0x195c984a44ae2b8ad5d49f48c0aaa0132c42521dcfc66513530203feca48dd6
  1. Funding the Account

To fund the new account, replace the address in the following command with your new one:

curl -d '{"amount":8646000000000, "address":"0x6e...eadf"}' -H "Content-Type: application/json" -X POST http://127.0.0.1:5050/mint

Note: The amount is specified in the previous command's output.

A successful fund addition will return:

{"new_balance":8646000000000,"tx_hash":"0x48...1919","unit":"wei"}
  1. Account Deployment

Deploy the account to the starknet devnet local node to register it with the chain:

sncast --url http://localhost:5050/rpc account deploy --name new_account --max-fee 0x64a7168300

A successful deployment provides a transaction hash. If it doesn't work, revisit your previous steps.

  1. Setting a Default Profile

You can define a default profile for your sncast actions. To set one, edit the Scarb.toml file. To make the new_account the default profile, find the section [tool.sncast.new_account] and change it to [tool.sncast]. This means sncast will default to using this profile unless instructed otherwise.

Step 4: Declaring and Deploying our Contract

By now, we've arrived at the crucial step of using sncast to declare and deploy our smart contracts.

Declaring the Contract

Recall that we drafted and tested the contract in Step 1. Here, we'll focus on two actions: building and declaring.

  1. Building the Contract

Execute the following to build the contract:

scarb build

If you've successfully run tests using snforge, the scarb build should operate without issues. After the build completes, a new target folder will appear at the root of your project.

Within the target folder, you'll find a dev sub-folder containing three files: *.casm.json, *.sierra.json, and *.starknet_artifacts.json.

If these files aren't present, it's likely due to missing configurations in your Scarb.toml file. To address this, append the following lines after dependencies:

[[target.starknet-contract]]
sierra = true
casm = true

These lines instruct the compiler to produce both sierra and casm outputs.

  1. Declaring the Contract

We will use the sncast declare command to declare the contract. Here's the format:

sncast declare [OPTIONS] --contract-name <CONTRACT>

Given this, the correct command would be:

sncast --profile account1 declare --contract-name HelloStarknet

Note:- that we've omitted the --url option. Why? When using --profile, as seen here with account1, it's not necessary. Remember, earlier in this guide, we discussed adding and creating new accounts. You can use either account1 or new_account and achieve the desired result.

Hint: You can define a default profile for sncast actions. Modify the Scarb.toml file to set a default. For example, to make new_account the default, find [tool.sncast.new_account] and change it to [tool.sncast]. Then, there's no need to specify the profile for each call, simplifying your command to:

sncast declare --contract-name HelloStarknet

The output will resemble:

command: declare
class_hash: 0x20fe30f3990ecfb673d723944f28202db5acf107a359bfeef861b578c00f2a0
transaction_hash: 0x7fbdcca80e7c666f1b5c4522fdad986ad3b731107001f7d8df5f3cb1ce8fd11

Make sure to note the **class hash as it will be essential in the subsequent step.

Note: If you encounter an error stating Class hash already declared, simply move to the next step. Redeclaring an already-declared contract isn't permissible. Use the mentioned class hash for deployment.

Deploying the Contract

With the contract successfully declared and a class hash obtained, we're ready to proceed to contract deployment. This step is straightforward. Replace <class-hash> in the command below with your obtained class hash:

sncast deploy --class-hash 0x20fe30f3990ecfb673d723944f28202db5acf107a359bfeef861b578c00f2a0

Executing this will likely yield:

command: deploy
contract_address: 0x7e3fc427c2f085e7f8adeaec7501cacdfe6b350daef18d76755ddaa68b3b3f9
transaction_hash: 0x6bdf6cfc8080336d9315f9b4df7bca5fb90135817aba4412ade6f942e9dbe60

However, you may encounter some issues, such as:

Error: RPC url not passed nor found in Scarb.toml. This indicates the absence of a default profile in the Scarb.toml file. To remedy this:

  • Add the --profile option, followed by the desired profile name, as per the ones you've established.
  • Alternatively, set a default profile as previously discussed in the "Declaring the Contract" section under "Hint" or as detailed in the "Adding, Creating, and Deploying Account" subsection.

You've successfully deployed your contract with sncast! Now, let's explore how to interact with it.

Interacting with the Contract

This section explains how to read and write information to the contract.

Invoking Contract Functions

To write to the contract, invoke its functions. Here's a basic overview of the command:

Usage: sncast invoke [OPTIONS] --contract-address <CONTRACT_ADDRESS> --function <FUNCTION>

Options:
  -a, --contract-address <CONTRACT_ADDRESS>  Address of the contract
  -f, --function <FUNCTION>                  Name of the function
  -c, --calldata <CALLDATA>                  Data for the function
  -m, --max-fee <MAX_FEE>                    Maximum transaction fee (auto-estimated if absent)
  -h, --help                                 Show help

To demonstrate, let's invoke the increase_balance method of our smart contract with a preset default profile. Not every option is always necessary; for instance, sometimes, including the --max-fee might be essential.

sncast invoke --contract-address 0x7e...b3f9 --function increase_balance --calldata 4

If successful, you'll receive a transaction hash like this:

command: invoke
transaction_hash: 0x33248e393d985a28826e9fbb143d2cf0bb3342f1da85483cf253b450973b638

Reading from the Contract

To retrieve data from the contract, use the sncast call command. Here's how it works:

sncast call --help

Executing the command displays:

Usage: sncast call [OPTIONS] --contract-address <CONTRACT_ADDRESS> --function <FUNCTION>

Options:
  -a, --contract-address <CONTRACT_ADDRESS>  Address of the contract (hex format)
  -f, --function <FUNCTION>                  Name of the function to call
  -c, --calldata <CALLDATA>                  Function arguments (list of hex values)
  -b, --block-id <BLOCK_ID>                  Block identifier for the call. Accepts: pending, latest, block hash (with a 0x prefix), or block number (u64). Default is 'pending'.
  -h, --help                                 Show help

For instance:

sncast call --contract-address 0x7e...b3f9 --function get_balance

While not all options are used in the example, you might need to include options like --calldata, specifying it as a list or array.

A successful call returns:

command: call
response: [0x4]

This indicates successful read and write operations on the contract.

sncast Multicall Guide

Use sncast multicall to simultaneously read and write to the contract. Let's explore how to effectively use this feature.

First, understand its basic usage:

sncast multicall --help

This command displays:

Execute multiple calls

Usage: sncast multicall <COMMAND>

Commands:
  run   Execute multicall using a .toml file
  new   Create a template for the multicall .toml file
  help  Display help for subcommand(s)

Options:
  -h, --help  Show help

To delve deeper, initiate the new subcommand:

Generate a template for the multicall .toml file

Usage: sncast multicall new [OPTIONS]

Options:
  -p, --output-path <OUTPUT_PATH>  File path for saving the template
  -o, --overwrite                  Overwrite file if it already exists at specified path
  -h, --help                       Display help

Generate a template called call1.toml:

sncast multicall new --output-path ./call1.toml --overwrite

This provides a basic template:

[[call]]
call_type = "deploy"
class_hash = ""
inputs = []
id = ""
unique = false

[[call]]
call_type = "invoke"
contract_address = ""
function = ""
inputs = []

Modify call1.toml to:

[[call]]
call_type = "invoke"
contract_address = "0x7e3fc427c2f085e7f8adeaec7501cacdfe6b350daef18d76755ddaa68b3b3f9"
function = "increase_balance"
inputs = ['0x4']

[[call]]
call_type = "invoke"
contract_address = "0x7e3fc427c2f085e7f8adeaec7501cacdfe6b350daef18d76755ddaa68b3b3f9"
function = "increase_balance"
inputs = ['0x1']

In multicalls, only deploy and invoke actions are allowed. For a detailed guide on these, refer to the earlier section.

Note: Ensure inputs are in hexadecimal format. Strings work normally, but numbers require this format for accurate results.

To execute the multicall, use:

sncast multicall run --path call1.toml

Upon success:

command: multicall run
transaction_hash: 0x1ae4122266f99a5ede495ff50fdbd927c31db27ec601eb9f3eaa938273d4d61

Check the balance:

sncast call --contract-address 0x7e...b3f9 --function get_balance

The response:

command: call
response: [0x9]

The expected balance, 0x9, is confirmed.

Conclusion

This guide detailed the use of sncast, a robust command-line tool tailored for starknet smart contracts. Its purpose is to make interactions with starknet's smart contracts effortless. Key functionalities include contract deployment, function invocation, and function calling.